Free peach SVG

Split peach for a name SVG

Split peach for a name, as a solid black shape — Split peach for a name. The preview is the SVG file itself.

A peach and its leaf cut across the middle with a clear band about 18 mm tall for a name. It comes as two pieces: the shoulders with the stalk and leaf, and the pointed base.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	5: 2 outer edges and 3 cut-outs
Cut length	546 mm at this size
Narrowest part	3.5 mm at this size
Nodes	50 curve and line segments

Measured from the file. PNG: 1,742 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.89 mm	139 mm	110	Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)	1.8 mm	277 mm	30	Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)	2.7 mm	416 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	3.6 mm	555 mm	6	Any material, including 3 mm wood and acrylic
5.2 × 6 in (132 × 152 mm)	5.3 mm	832 mm	2	Any material, including 3 mm wood and acrylic
6.93 × 8 in (176 × 203 mm)	7.1 mm	1,109 mm	1	Any material, including 3 mm wood and acrylic
10.39 × 12 in (264 × 305 mm)	11 mm	1,664 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peach SVG files

← Peach monogram frame All 15 peaches Three peaches →