Paper star for a wall or a card front SVG
One side of a hollow star with a tab on all ten edges of its rim. Fold it, close the slit, turn the tabs under and glue them down: the star stands 39 mm proud of a wall, a card or a wrapped present. Cut 200 mm wide, it is 185 mm across from side point to side point.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.72 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 91: 1 outer edge and 90 cut-outs |
| Cut length | 1,139 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 436 curve and line segments |
| Also found as | 3D star SVG |
Measured from the file. PNG: 2,000 × 1,894 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.76 mm | 289 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.89 in (51 × 48 mm) | 1.5 mm | 579 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.83 in (76 × 72 mm) | 2.3 mm | 868 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.78 in (102 × 96 mm) | 3 mm | 1,157 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.67 in (152 × 144 mm) | 4.6 mm | 1,736 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.56 in (203 × 192 mm) | 6.1 mm | 2,314 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.34 in (305 × 288 mm) | 9.1 mm | 3,472 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More paper star SVG files
-
Paper star point for a star in five pieces Solid · one piece -
Paper star lantern point with cut-outs Solid · one piece -
Slot-together paper star in two pieces Solid · 2 pieces -
Folded paper star with eight points Solid · one piece -
Folded paper star with six points Solid · one piece -
Folded paper stars in three sizes Solid · 4 pieces -
Paper star to print, cut and fold by hand Outline · 41 pieces -
Paper stars in two tones Layered · 12 pieces
← Paper star ornament in two halves All 11 paper stars Paper star point for a star in five pieces →