Paper star ornament in two halves SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two identical halves of a hollow star. Fold each, glue the sliver beside its slit under the next face, then glue the halves rim to rim: the five tabs of each meet the five plain edges of the other. Cut 250 mm wide, the star is 113 mm across and 48 mm thick. Loose pieces.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.87 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 62: 2 outer edges and 60 cut-outs |
| Cut length | 839 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 290 curve and line segments |
| Also found as | 3D star ornament SVG |
Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.25 mm | 213 mm | 180 | Too fine for most machines |
| 2 × 0.95 in (51 × 24 mm) | 0.51 mm | 426 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.42 in (76 × 36 mm) | 0.76 mm | 639 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.9 in (102 × 48 mm) | 1 mm | 852 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.85 in (152 × 72 mm) | 1.5 mm | 1,279 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.8 in (203 × 97 mm) | 2 mm | 1,705 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.7 in (305 × 145 mm) | 3 mm | 2,557 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More paper star SVG files
-
Paper star for a wall or a card front Solid · one piece
-
Paper star point for a star in five pieces Solid · one piece
-
Paper star lantern point with cut-outs Solid · one piece
-
Slot-together paper star in two pieces Solid · 2 pieces
-
Folded paper star with eight points Solid · one piece
-
Folded paper star with six points Solid · one piece
-
Folded paper stars in three sizes Solid · 4 pieces
-
Paper star to print, cut and fold by hand Outline · 41 pieces
← Folded paper star with ten creases All 11 paper stars Paper star for a wall or a card front →