Free panther SVG

Pouncing panther SVG

Pouncing panther, as a solid black shape — Pouncing panther. The preview is the SVG file itself.

A panther springing down on something, front paws reaching and back legs at full stretch, the tail thrown up behind for balance. One solid piece with an eye and two muscle lines.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	472 mm at this size
Narrowest part	2.5 mm at this size
Nodes	210 curve and line segments

Measured from the file. PNG: 2,000 × 1,540 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.64 mm	120 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)	1.3 mm	240 mm	35	Vinyl, card and thin sheet
3 × 2.28 in (76 × 58 mm)	1.9 mm	360 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	2.5 mm	480 mm	6	Vinyl, card and thin sheet
6 × 4.57 in (152 × 116 mm)	3.8 mm	719 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.09 in (203 × 155 mm)	5.1 mm	959 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.13 in (305 × 232 mm)	7.6 mm	1,439 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More panther SVG files

← Crouching panther All 12 panthers Sitting panther →