Free palm tree SVG

Straight palm tree outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Straight palm tree outline, drawn as a line
Straight palm tree outline. The preview is the SVG file itself.

An upright palm with three smooth fronds each side, drawn as one outline. Symmetric and simple enough to cut from felt or trace onto wood.

What is in the file

Size90 × 100 mm (3.54 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length962 mm at this size
Narrowest part2.2 mm at this size
Nodes113 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,808 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)0.56 mm244 mm110Fine detail: vinyl and paper only, weed with care
1.8 × 2 in (46 × 51 mm)1.1 mm489 mm30Vinyl, card and thin sheet
2.7 × 3 in (69 × 76 mm)1.7 mm733 mm12Vinyl, card and thin sheet
3.6 × 4 in (91 × 102 mm)2.2 mm977 mm6Vinyl, card and thin sheet
5.4 × 6 in (137 × 152 mm)3.4 mm1,466 mm2Any material, including 3 mm wood and acrylic
7.2 × 8 in (183 × 203 mm)4.5 mm1,955 mm1Any material, including 3 mm wood and acrylic
10.8 × 12 in (274 × 305 mm)6.7 mm2,932 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More palm tree SVG files

← Palm tree outline All 14 palm trees Palm tree with coconuts →