Free onesie SVG

Onesie template, front and back SVG

Onesie template, front and back, drawn as a line
Onesie template, front and back. The preview is the SVG file itself.

Two line drawings side by side: the front with a scooped neck and the back with a high one. Use the pair to plan a design for both sides of a bodysuit.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 58 mm (3.94 × 2.29 in), scales to any size
Pieces2 separate pieces
Outlines to cut14: 2 outer edges and 12 cut-outs
Cut length1,045 mm at this size
Narrowest part2 mm at this size
Nodes267 curve and line segments

Measured from the file. PNG: 2,000 × 1,194 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.51 mm265 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.16 in (51 × 30 mm)1 mm531 mm40Vinyl, card and thin sheet
3 × 1.74 in (76 × 44 mm)1.5 mm796 mm18Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)2 mm1,062 mm8Vinyl, card and thin sheet
6 × 3.49 in (152 × 89 mm)3 mm1,593 mm3Any material, including 3 mm wood and acrylic
8 × 4.65 in (203 × 118 mm)4.1 mm2,123 mm2Any material, including 3 mm wood and acrylic
12 × 6.97 in (305 × 177 mm)6.1 mm3,185 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More onesie SVG files

← Onesie gift tag All 12 onesies Layered long sleeve onesie →