One with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“One” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.97 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 8: 4 outer edges and 4 cut-outs |
| Cut length | 1,000 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 154 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,038 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | Over 1.5 mm | 254 mm | 170 | Vinyl, card and thin sheet |
| 2 × 1 in (51 × 25 mm) | Over 3 mm | 508 mm | 50 | Any material, including 3 mm wood and acrylic |
| 3 × 1.5 in (76 × 38 mm) | Over 4.6 mm | 762 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 2 in (102 × 51 mm) | Over 6.1 mm | 1,016 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3 in (152 × 76 mm) | Over 9.1 mm | 1,524 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4 in (203 × 102 mm) | Over 12 mm | 2,032 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6 in (305 × 152 mm) | Over 18 mm | 3,048 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More One SVG files
-
One with a birthday cake Solid · 3 pieces
-
One in Pacifico Solid · 2 pieces
-
One in Lobster Solid · 2 pieces
-
One in Kaushan Script Solid · 3 pieces
-
One in Lilita One Solid · 3 pieces
-
One in Alfa Slab One Solid · 3 pieces
-
One in Amatic SC Solid · 3 pieces
-
One in block capitals Solid · 3 pieces
← One stencil plate All 13 One designs One with a birthday cake →