Free One SVG

One in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

One in Lobster, as a solid black shape
One in Lobster. The preview is the SVG file itself.

“One” set in Lobster, a bold upright script. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 48 mm (3.94 × 1.89 in), scales to any size
Pieces2 separate pieces
Outlines to cut3: 2 outer edges and 1 cut-out
Cut length628 mm at this size
Narrowest part2.8 mm at this size
Nodes91 curve and line segments

Measured from the file. PNG: 2,000 × 1,002 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.71 mm160 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.96 in (51 × 24 mm)1.4 mm319 mm50Vinyl, card and thin sheet
3 × 1.44 in (76 × 37 mm)2.1 mm479 mm21Vinyl, card and thin sheet
4 × 1.92 in (102 × 49 mm)2.8 mm638 mm10Vinyl, card and thin sheet
6 × 2.89 in (152 × 73 mm)4.3 mm957 mm3Any material, including 3 mm wood and acrylic
8 × 3.85 in (203 × 98 mm)5.7 mm1,276 mm3Any material, including 3 mm wood and acrylic
12 × 5.77 in (305 × 147 mm)8.5 mm1,914 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More One SVG files

← One in Pacifico All 13 One designs One in Kaushan Script →