Free oil derrick SVG

Oil pump jack outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oil pump jack outline, drawn as a line
Oil pump jack outline. The preview is the SVG file itself.

The pumpjack as an even line: horse head, walking beam, pitman, crank and counterweight, gearbox, samson post, motor, wellhead and skid on a ground line. For colouring pages and pen plotters.

What is in the file

Size100 × 47 mm (3.94 × 1.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,028 mm at this size
Narrowest part1.9 mm at this size
Nodes177 curve and line segments

Measured from the file. PNG: 2,000 × 988 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.48 mm261 mm180Too fine for most machines
2 × 0.95 in (51 × 24 mm)0.97 mm522 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.42 in (76 × 36 mm)1.4 mm783 mm21Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)1.9 mm1,044 mm10Vinyl, card and thin sheet
6 × 2.84 in (152 × 72 mm)2.9 mm1,567 mm4Vinyl, card and thin sheet
8 × 3.79 in (203 × 96 mm)3.9 mm2,089 mm3Any material, including 3 mm wood and acrylic
12 × 5.69 in (305 × 144 mm)5.8 mm3,133 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More oil derrick SVG files

← Oil derrick with a blank sign All 14 oil derricks Layered oilfield sunset in four colours →