Free octopus SVG

Single octopus tentacle SVG

Single octopus tentacle, as a solid black shape — Single octopus tentacle. The preview is the SVG file itself.

One thick arm that rises, leans and winds into a spiral, with suckers along its inner side. Use it to hold a monogram, wrap a corner or curl round the edge of a frame.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	58 × 100 mm (2.28 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	22: 1 outer edge and 21 cut-outs
Cut length	523 mm at this size
Narrowest part	1.7 mm at this size
Nodes	130 curve and line segments

Measured from the file. PNG: 1,188 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.58 × 1 in (15 × 25 mm)	0.43 mm	133 mm	150	Too fine for most machines
1.16 × 2 in (29 × 51 mm)	0.86 mm	266 mm	45	Fine detail: vinyl and paper only, weed with care
1.73 × 3 in (44 × 76 mm)	1.3 mm	399 mm	18	Vinyl, card and thin sheet
2.31 × 4 in (59 × 102 mm)	1.7 mm	531 mm	8	Vinyl, card and thin sheet
3.47 × 6 in (88 × 152 mm)	2.6 mm	797 mm	3	Vinyl, card and thin sheet
4.62 × 8 in (117 × 203 mm)	3.5 mm	1,063 mm	2	Any material, including 3 mm wood and acrylic
6.94 × 12 in (176 × 305 mm)	5.2 mm	1,594 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More octopus SVG files

← Octopus tentacles rising All 12 octopuses Octopus tentacle frame →