Free octopus SVG

Drifting octopus with suckers SVG

Drifting octopus with suckers, as a solid black shape — Drifting octopus with suckers. The preview is the SVG file itself.

An octopus hanging in the water with its arms trailing below it, the outer ones curling up at different heights and a row of suckers cut down each. Tall and narrow, for tumblers and bookmarks.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.64 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	65: 1 outer edge and 64 cut-outs
Cut length	1,243 mm at this size
Narrowest part	1.6 mm at this size
Nodes	406 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.41 mm	316 mm	100	Too fine for most machines
1.85 × 2 in (47 × 51 mm)	0.81 mm	631 mm	25	Fine detail: vinyl and paper only, weed with care
2.77 × 3 in (70 × 76 mm)	1.2 mm	947 mm	12	Vinyl, card and thin sheet
3.7 × 4 in (94 × 102 mm)	1.6 mm	1,263 mm	6	Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)	2.4 mm	1,894 mm	2	Vinyl, card and thin sheet
7.39 × 8 in (188 × 203 mm)	3.3 mm	2,526 mm	1	Any material, including 3 mm wood and acrylic
11.09 × 12 in (282 × 305 mm)	4.9 mm	3,789 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More octopus SVG files

← Octopus silhouette All 12 octopuses Cute octopus →