Free nutcracker SVG

Three nutcrackers in a row SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three nutcrackers in a row, as a solid black shape
Three nutcrackers in a row. The preview is the SVG file itself.

A soldier, a king and a drummer in a fur hat standing shoulder to shoulder on one long base. Each keeps his face and buttons. For a mantel, a banner or the front of a Christmas card.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut91: 1 outer edge and 90 cut-outs
Cut length2,218 mm at this size
Narrowest part1 mm at this size
Nodes1,086 curve and line segments

Measured from the file. PNG: 2,000 × 1,804 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.25 mm563 mm110Too fine for most machines
2 × 1.8 in (51 × 46 mm)0.51 mm1,127 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.69 in (76 × 68 mm)0.76 mm1,690 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.59 in (102 × 91 mm)1 mm2,253 mm6Vinyl, card and thin sheet
6 × 5.39 in (152 × 137 mm)1.5 mm3,380 mm2Vinyl, card and thin sheet
8 × 7.18 in (203 × 182 mm)2 mm4,507 mm1Vinyl, card and thin sheet
12 × 10.78 in (305 × 274 mm)3 mm6,760 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More nutcracker SVG files

← Cute little nutcracker All 12 nutcrackers Nutcracker ballet with a ballerina →