Free nutcracker SVG

Nutcracker with a staff SVG

Nutcracker with a staff, as a solid black shape — Nutcracker with a staff. The preview is the SVG file itself.

The soldier holding a tall staff topped with a ball in one hand, as the big ones outside shop doors do. The staff runs from above his hat to the base, so it is well supported.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	40 × 100 mm (1.57 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	33: 1 outer edge and 32 cut-outs
Cut length	953 mm at this size
Narrowest part	1.3 mm at this size
Nodes	366 curve and line segments

Measured from the file. PNG: 846 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.4 × 1 in (10 × 25 mm)	0.33 mm	242 mm	200	Too fine for most machines
0.8 × 2 in (20 × 51 mm)	0.66 mm	484 mm	60	Fine detail: vinyl and paper only, weed with care
1.2 × 3 in (30 × 76 mm)	0.99 mm	726 mm	24	Fine detail: vinyl and paper only, weed with care
1.6 × 4 in (41 × 102 mm)	1.3 mm	968 mm	12	Vinyl, card and thin sheet
2.4 × 6 in (61 × 152 mm)	2 mm	1,452 mm	4	Vinyl, card and thin sheet
3.2 × 8 in (81 × 203 mm)	2.6 mm	1,936 mm	3	Vinyl, card and thin sheet
4.8 × 12 in (122 × 305 mm)	4 mm	2,905 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More nutcracker SVG files

← Nutcracker face All 12 nutcrackers Nutcracker king with a crown →