Free New Years Eve SVG

New Years Eve in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

New Years Eve in Alfa Slab One, as a solid black shape
New Years Eve in Alfa Slab One. The preview is the SVG file itself.

“New Years Eve” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 35 mm (3.94 × 1.39 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length658 mm at this size
Narrowest part1.8 mm at this size
Nodes209 curve and line segments

Measured from the file. PNG: 2,000 × 754 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.35 in (25 × 9 mm)0.46 mm167 mm220Too fine for most machines
2 × 0.7 in (51 × 18 mm)0.91 mm334 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.06 in (76 × 27 mm)1.4 mm501 mm27Vinyl, card and thin sheet
4 × 1.41 in (102 × 36 mm)1.8 mm669 mm14Vinyl, card and thin sheet
6 × 2.11 in (152 × 54 mm)2.7 mm1,003 mm5Vinyl, card and thin sheet
8 × 2.82 in (203 × 72 mm)3.7 mm1,337 mm4Any material, including 3 mm wood and acrylic
12 × 4.22 in (305 × 107 mm)5.5 mm2,006 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More New Years Eve SVG files

← New Years Eve in Lilita One All 13 New Years Eve designs New Years Eve in Amatic SC →