Free New Years Eve SVG

New Years Eve in Amatic SC SVG

New Years Eve in Amatic SC, as a solid black shape — New Years Eve in Amatic SC. The preview is the SVG file itself.

“New Years Eve” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	13: 11 outer edges and 2 cut-outs
Cut length	1,076 mm at this size
Narrowest part	1.9 mm at this size
Nodes	408 curve and line segments

Measured from the file. PNG: 2,000 × 1,456 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.48 mm	273 mm	130	Too fine for most machines
2 × 1.43 in (51 × 36 mm)	0.97 mm	547 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.15 in (76 × 55 mm)	1.4 mm	820 mm	15	Vinyl, card and thin sheet
4 × 2.87 in (102 × 73 mm)	1.9 mm	1,093 mm	6	Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)	2.9 mm	1,640 mm	2	Vinyl, card and thin sheet
8 × 5.74 in (203 × 146 mm)	3.9 mm	2,186 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.6 in (305 × 219 mm)	5.8 mm	3,280 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More New Years Eve SVG files

← New Years Eve in Alfa Slab One All 12 New Years Eve designs New Years Eve in block capitals →