Free New Year Crew SVG

New Year Crew outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

New Year Crew outline lettering, drawn as a line
New Year Crew outline lettering. The preview is the SVG file itself.

“New Year Crew” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces11 separate pieces
Outlines to cut42: 11 outer edges and 31 cut-outs
Cut length1,057 mm at this size
Narrowest part1.4 mm at this size
Nodes469 curve and line segments

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.36 mm268 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.71 mm537 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.29 in (76 × 33 mm)1.1 mm805 mm24Vinyl, card and thin sheet
4 × 1.72 in (102 × 44 mm)1.4 mm1,074 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)2.1 mm1,611 mm4Vinyl, card and thin sheet
8 × 3.43 in (203 × 87 mm)2.8 mm2,148 mm3Vinyl, card and thin sheet
12 × 5.15 in (305 × 131 mm)4.3 mm3,222 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More New Year Crew SVG files

← New Year Crew with stars All 13 New Year Crew designs New Year Crew stencil plate →