Never Give Up in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Never Give Up” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.88 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 15: 12 outer edges and 3 cut-outs |
| Cut length | 1,041 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 350 curve and line segments |
Measured from the file. PNG: 2,000 × 1,485 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 19 mm) | 0.3 mm | 264 mm | 130 | Too fine for most machines |
| 2 × 1.46 in (51 × 37 mm) | 0.61 mm | 529 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.2 in (76 × 56 mm) | 0.91 mm | 793 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.93 in (102 × 74 mm) | 1.2 mm | 1,058 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.39 in (152 × 112 mm) | 1.8 mm | 1,586 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.86 in (203 × 149 mm) | 2.4 mm | 2,115 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.78 in (305 × 223 mm) | 3.7 mm | 3,173 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Never Give Up SVG files
-
Never Give Up in Lilita One Solid · 12 pieces
-
Never Give Up in Alfa Slab One Solid · 12 pieces
-
Never Give Up in Amatic SC Solid · 11 pieces
-
Never Give Up in block capitals Solid · 11 pieces
-
Never Give Up in script and capitals Solid · 7 pieces
-
Never Give Up with stars Solid · 15 pieces
-
Never Give Up outline lettering Outline · 13 pieces
-
Never Give Up stencil plate Solid · one piece
← Never Give Up in Lobster All 13 Never Give Up designs Never Give Up in Lilita One →