Free Never Give Up SVG

Never Give Up in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Never Give Up in Lilita One, as a solid black shape
Never Give Up in Lilita One. The preview is the SVG file itself.

“Never Give Up” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 62 mm (3.94 × 2.42 in), scales to any size
Pieces12 separate pieces
Outlines to cut16: 12 outer edges and 4 cut-outs
Cut length854 mm at this size
Narrowest part3.4 mm at this size
Nodes225 curve and line segments

Measured from the file. PNG: 2,000 × 1,260 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.86 mm217 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.23 in (51 × 31 mm)1.7 mm434 mm40Vinyl, card and thin sheet
3 × 1.84 in (76 × 47 mm)2.6 mm651 mm15Vinyl, card and thin sheet
4 × 2.46 in (102 × 62 mm)3.5 mm868 mm8Any material, including 3 mm wood and acrylic
6 × 3.69 in (152 × 94 mm)5.2 mm1,301 mm3Any material, including 3 mm wood and acrylic
8 × 4.92 in (203 × 125 mm)6.9 mm1,735 mm2Any material, including 3 mm wood and acrylic
12 × 7.38 in (305 × 187 mm)10 mm2,603 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Never Give Up SVG files

← Never Give Up in Kaushan Script All 13 Never Give Up designs Never Give Up in Alfa Slab One →