Free My Boo Crew SVG

My Boo Crew stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

My Boo Crew stencil plate, as a solid black shape
My Boo Crew stencil plate. The preview is the SVG file itself.

A rounded plate with “MY BOO CREW” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size60 × 100 mm (2.34 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length1,401 mm at this size
Narrowest part1.1 mm at this size
Nodes244 curve and line segments

Measured from the file. PNG: 1,221 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.28 mm356 mm150Too fine for most machines
1.19 × 2 in (30 × 51 mm)0.56 mm712 mm40Fine detail: vinyl and paper only, weed with care
1.78 × 3 in (45 × 76 mm)0.84 mm1,068 mm18Fine detail: vinyl and paper only, weed with care
2.38 × 4 in (60 × 102 mm)1.1 mm1,423 mm8Vinyl, card and thin sheet
3.57 × 6 in (91 × 152 mm)1.7 mm2,135 mm3Vinyl, card and thin sheet
4.76 × 8 in (121 × 203 mm)2.2 mm2,847 mm2Vinyl, card and thin sheet
7.14 × 12 in (181 × 305 mm)3.4 mm4,270 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More My Boo Crew SVG files

← My Boo Crew outline lettering All 12 My Boo Crew designs My Boo Crew with a drop shadow →