Free My Boo Crew SVG

My Boo Crew in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

My Boo Crew in Amatic SC, as a solid black shape
My Boo Crew in Amatic SC. The preview is the SVG file itself.

“My Boo Crew” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size42 × 100 mm (1.64 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut14: 9 outer edges and 5 cut-outs
Cut length885 mm at this size
Narrowest part1.5 mm at this size
Nodes358 curve and line segments

Measured from the file. PNG: 877 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.42 × 1 in (11 × 25 mm)0.38 mm225 mm190Too fine for most machines
0.83 × 2 in (21 × 51 mm)0.76 mm450 mm55Fine detail: vinyl and paper only, weed with care
1.25 × 3 in (32 × 76 mm)1.1 mm674 mm24Vinyl, card and thin sheet
1.66 × 4 in (42 × 102 mm)1.5 mm899 mm12Vinyl, card and thin sheet
2.5 × 6 in (63 × 152 mm)2.3 mm1,349 mm4Vinyl, card and thin sheet
3.33 × 8 in (85 × 203 mm)3 mm1,798 mm3Any material, including 3 mm wood and acrylic
4.99 × 12 in (127 × 305 mm)4.6 mm2,697 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More My Boo Crew SVG files

← My Boo Crew in Alfa Slab One All 12 My Boo Crew designs My Boo Crew in block capitals →