Free music note SVG

Music notes on a wavy staff SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Music notes on a wavy staff, as a solid black shape
Music notes on a wavy staff. The preview is the SVG file itself.

Five staff lines that rise and fall like a ribbon, with a treble clef at the start, seven notes along the way and a double bar at the end. The clef, the stems and the bar lines tie the lines into one piece.

What is in the file

Size100 × 54 mm (3.94 × 2.13 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut42: 1 outer edge and 41 cut-outs
Cut length1,298 mm at this size
Narrowest part1 mm at this size
Nodes336 curve and line segments

Measured from the file. PNG: 2,000 × 1,117 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.25 mm330 mm160Too fine for most machines
2 × 1.08 in (51 × 27 mm)0.51 mm659 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.62 in (76 × 41 mm)0.76 mm989 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.16 in (102 × 55 mm)1 mm1,319 mm10Vinyl, card and thin sheet
6 × 3.25 in (152 × 82 mm)1.5 mm1,978 mm3Vinyl, card and thin sheet
8 × 4.33 in (203 × 110 mm)2 mm2,638 mm2Vinyl, card and thin sheet
12 × 6.49 in (305 × 165 mm)3 mm3,956 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More music note SVG files

← Set of music notes and a clef All 17 music notes Blank staff for music notes →