Free Mr and Mrs SVG

Mr and Mrs stencil plate SVG

Mr and Mrs stencil plate, as a solid black shape — Mr and Mrs stencil plate. The preview is the SVG file itself.

A rounded plate with “MR AND MRS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,602 mm at this size
Narrowest part	1.1 mm at this size
Nodes	163 curve and line segments

Measured from the file. PNG: 2,000 × 1,750 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.87 in (25 × 22 mm)	0.28 mm	407 mm	110	Too fine for most machines
2 × 1.74 in (51 × 44 mm)	0.56 mm	814 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.61 in (76 × 66 mm)	0.84 mm	1,221 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.48 in (102 × 88 mm)	1.1 mm	1,628 mm	6	Vinyl, card and thin sheet
6 × 5.22 in (152 × 133 mm)	1.7 mm	2,441 mm	2	Vinyl, card and thin sheet
8 × 6.96 in (203 × 177 mm)	2.2 mm	3,255 mm	1	Vinyl, card and thin sheet
12 × 10.44 in (305 × 265 mm)	3.4 mm	4,883 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mr and Mrs SVG files

← Mr and Mrs outline lettering All 12 Mr and Mrs designs Mr and Mrs with a drop shadow →