Free Mr and Mrs SVG

Mr and Mrs in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mr and Mrs in Lobster, as a solid black shape
Mr and Mrs in Lobster. The preview is the SVG file itself.

“Mr and Mrs” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 75 mm (3.94 × 2.95 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length914 mm at this size
Narrowest part1.4 mm at this size
Nodes196 curve and line segments

Measured from the file. PNG: 2,000 × 1,517 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.36 mm232 mm120Too fine for most machines
2 × 1.5 in (51 × 38 mm)0.71 mm464 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.25 in (76 × 57 mm)1.1 mm696 mm12Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)1.4 mm929 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)2.1 mm1,393 mm2Vinyl, card and thin sheet
8 × 5.99 in (203 × 152 mm)2.8 mm1,857 mm1Vinyl, card and thin sheet
12 × 8.99 in (305 × 228 mm)4.3 mm2,786 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mr and Mrs SVG files

← Mr and Mrs in Pacifico All 13 Mr and Mrs designs Mr and Mrs in Kaushan Script →