Free moose SVG

Moose antlers SVG

Moose antlers, as a solid black shape — Moose antlers. The preview is the SVG file itself.

A pair of palmate antlers on their own, joined by a small plate at the brow: two wide palms, six tines each and a short tine low down. Set them over a name, a monogram or a photo.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.58 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	444 mm at this size
Narrowest part	4.9 mm at this size
Nodes	156 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 848 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	1.2 mm	113 mm	200	Vinyl, card and thin sheet
2 × 0.8 in (51 × 20 mm)	2.5 mm	226 mm	60	Vinyl, card and thin sheet
3 × 1.2 in (76 × 31 mm)	3.7 mm	338 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.6 in (102 × 41 mm)	5 mm	451 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.41 in (152 × 61 mm)	7.5 mm	677 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.21 in (203 × 81 mm)	10 mm	902 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.81 in (305 × 122 mm)	15 mm	1,353 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More moose SVG files

← Moose head from the front All 12 moose Cute moose with a round nose →