Free monster truck SVG

Monster truck crushing a car SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Monster truck crushing a car, as a solid black shape
Monster truck crushing a car. The preview is the SVG file itself.

A monster truck climbing over a flattened car, front wheels up on the crumpled roof and back wheels still on the ground. The car and the truck are one piece.

What is in the file

Size100 × 67 mm (3.94 × 2.63 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length1,154 mm at this size
Narrowest part1.2 mm at this size
Nodes421 curve and line segments

Measured from the file. PNG: 2,000 × 1,360 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.3 mm293 mm140Too fine for most machines
2 × 1.33 in (51 × 34 mm)0.61 mm586 mm35Fine detail: vinyl and paper only, weed with care
3 × 2 in (76 × 51 mm)0.91 mm879 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.67 in (102 × 68 mm)1.2 mm1,172 mm8Vinyl, card and thin sheet
6 × 4 in (152 × 102 mm)1.8 mm1,759 mm2Vinyl, card and thin sheet
8 × 5.34 in (203 × 136 mm)2.4 mm2,345 mm2Vinyl, card and thin sheet
12 × 8 in (305 × 203 mm)3.7 mm3,517 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More monster truck SVG files

← Monster truck outline All 12 monster trucks Monster truck doing a wheelie →