Free mistletoe SVG

Layered mistletoe in three colours SVG

Layered mistletoe in three colours, in layered colours
Layered mistletoe in three colours. The preview is the SVG file itself.

Three layers to stack: the green stems and leaves, the berries in cream, and a red bow. Each layer is one piece or a set of plain discs, so it goes together in a minute.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 93 mm (3.94 × 3.65 in), scales to any size
Pieces9 separate pieces
Outlines to cut13: 9 outer edges and 4 cut-outs
Cut length1,212 mm at this size
Narrowest part3.3 mm at this size
Nodes215 curve and line segments
Layers3: leaves, berries and bow

Measured from the file. PNG: 2,000 × 1,862 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.84 mm308 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.86 in (51 × 47 mm)1.7 mm616 mm25Vinyl, card and thin sheet
3 × 2.78 in (76 × 71 mm)2.5 mm924 mm12Vinyl, card and thin sheet
4 × 3.71 in (102 × 94 mm)3.4 mm1,231 mm6Any material, including 3 mm wood and acrylic
6 × 5.57 in (152 × 141 mm)5 mm1,847 mm2Any material, including 3 mm wood and acrylic
8 × 7.42 in (203 × 189 mm)6.7 mm2,463 mm1Any material, including 3 mm wood and acrylic
12 × 11.14 in (305 × 283 mm)10 mm3,694 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mistletoe SVG files

← Mistletoe silhouette All 12 mistletoe sprigs Mistletoe sprig with a bow →