Free Merry Christmas SVG

Merry Christmas stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merry Christmas stencil plate, as a solid black shape
Merry Christmas stencil plate. The preview is the SVG file itself.

A rounded plate with “MERRY CHRISTMAS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 62 mm (3.94 × 2.45 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,379 mm at this size
Narrowest part1.7 mm at this size
Nodes347 curve and line segments

Measured from the file. PNG: 2,000 × 1,275 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.43 mm350 mm140Too fine for most machines
2 × 1.25 in (51 × 32 mm)0.86 mm701 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 47 mm)1.3 mm1,051 mm15Vinyl, card and thin sheet
4 × 2.49 in (102 × 63 mm)1.7 mm1,401 mm8Vinyl, card and thin sheet
6 × 3.74 in (152 × 95 mm)2.6 mm2,102 mm3Vinyl, card and thin sheet
8 × 4.98 in (203 × 127 mm)3.5 mm2,802 mm2Any material, including 3 mm wood and acrylic
12 × 7.48 in (305 × 190 mm)5.2 mm4,203 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merry Christmas SVG files

← Merry Christmas outline lettering All 13 Merry Christmas designs Merry Christmas with a drop shadow →