Free Merry Christmas SVG

Merry Christmas in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merry Christmas in Amatic SC, as a solid black shape
Merry Christmas in Amatic SC. The preview is the SVG file itself.

“Merry Christmas” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 71 mm (3.94 × 2.78 in), scales to any size
Pieces14 separate pieces
Outlines to cut18: 14 outer edges and 4 cut-outs
Cut length1,375 mm at this size
Narrowest part1.1 mm at this size
Nodes484 curve and line segments

Measured from the file. PNG: 2,000 × 1,437 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.28 mm349 mm130Too fine for most machines
2 × 1.41 in (51 × 36 mm)0.56 mm699 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.12 in (76 × 54 mm)0.84 mm1,048 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.83 in (102 × 72 mm)1.1 mm1,397 mm8Vinyl, card and thin sheet
6 × 4.24 in (152 × 108 mm)1.7 mm2,095 mm2Vinyl, card and thin sheet
8 × 5.66 in (203 × 144 mm)2.2 mm2,794 mm2Vinyl, card and thin sheet
12 × 8.48 in (305 × 215 mm)3.4 mm4,191 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merry Christmas SVG files

← Merry Christmas in Alfa Slab One All 13 Merry Christmas designs Merry Christmas in block capitals →