Free Merry and Bright SVG

Merry and Bright in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merry and Bright in Lilita One, as a solid black shape
Merry and Bright in Lilita One. The preview is the SVG file itself.

“Merry and Bright” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 45 mm (3.94 × 1.75 in), scales to any size
Pieces15 separate pieces
Outlines to cut21: 15 outer edges and 6 cut-outs
Cut length783 mm at this size
Narrowest part2.3 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 2,000 × 933 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.58 mm199 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.89 in (51 × 23 mm)1.2 mm398 mm55Vinyl, card and thin sheet
3 × 1.34 in (76 × 34 mm)1.8 mm597 mm21Vinyl, card and thin sheet
4 × 1.78 in (102 × 45 mm)2.3 mm796 mm12Vinyl, card and thin sheet
6 × 2.67 in (152 × 68 mm)3.5 mm1,193 mm4Any material, including 3 mm wood and acrylic
8 × 3.56 in (203 × 90 mm)4.7 mm1,591 mm3Any material, including 3 mm wood and acrylic
12 × 5.34 in (305 × 136 mm)7 mm2,387 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merry and Bright SVG files

← Merry and Bright in Kaushan Script All 13 Merry and Bright designs Merry and Bright in Alfa Slab One →