Free Merry and Bright SVG

Merry and Bright in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Merry and Bright in Amatic SC, as a solid black shape
Merry and Bright in Amatic SC. The preview is the SVG file itself.

“Merry and Bright” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 64 mm (3.94 × 2.52 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length1,322 mm at this size
Narrowest part1 mm at this size
Nodes464 curve and line segments

Measured from the file. PNG: 2,000 × 1,308 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.25 mm336 mm140Too fine for most machines
2 × 1.28 in (51 × 33 mm)0.51 mm672 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.92 in (76 × 49 mm)0.76 mm1,007 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.56 in (102 × 65 mm)1 mm1,343 mm8Vinyl, card and thin sheet
6 × 3.84 in (152 × 98 mm)1.5 mm2,015 mm3Vinyl, card and thin sheet
8 × 5.12 in (203 × 130 mm)2 mm2,686 mm2Vinyl, card and thin sheet
12 × 7.68 in (305 × 195 mm)3 mm4,029 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Merry and Bright SVG files

← Merry and Bright in Alfa Slab One All 13 Merry and Bright designs Merry and Bright in block capitals →