Free mermaid SVG

Mermaid tail outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mermaid tail outline, drawn as a line
Mermaid tail outline. The preview is the SVG file itself.

A tail drawn as an even line with a solid fin, curving the other way from the scaled tail. Fill it with a pattern, a name or glitter vinyl.

What is in the file

Size41 × 100 mm (1.61 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length513 mm at this size
Narrowest part1 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 862 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.41 × 1 in (10 × 25 mm)0.25 mm130 mm200Too fine for most machines
0.82 × 2 in (21 × 51 mm)0.51 mm261 mm60Fine detail: vinyl and paper only, weed with care
1.22 × 3 in (31 × 76 mm)0.76 mm391 mm24Fine detail: vinyl and paper only, weed with care
1.63 × 4 in (41 × 102 mm)1 mm521 mm12Vinyl, card and thin sheet
2.45 × 6 in (62 × 152 mm)1.5 mm782 mm4Vinyl, card and thin sheet
3.26 × 8 in (83 × 203 mm)2 mm1,042 mm3Vinyl, card and thin sheet
4.9 × 12 in (124 × 305 mm)3 mm1,564 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mermaid SVG files

← Mermaid tail with scales All 12 mermaids Three mermaid tails →