Free mermaid SVG

Mandala mermaid tail SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mandala mermaid tail, as a solid black shape
Mandala mermaid tail. The preview is the SVG file itself.

A mermaid tail filled with teardrops in place of scales: rows of them across the hips, then a single file of dots that shrinks towards the fin, and a row of dots at the waist. Cut it at full size.

What is in the file

Size42 × 100 mm (1.65 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut25: 1 outer edge and 24 cut-outs
Cut length618 mm at this size
Narrowest part1 mm at this size
Nodes269 curve and line segments

Measured from the file. PNG: 883 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.42 × 1 in (11 × 25 mm)0.25 mm157 mm190Too fine for most machines
0.84 × 2 in (21 × 51 mm)0.51 mm314 mm55Fine detail: vinyl and paper only, weed with care
1.26 × 3 in (32 × 76 mm)0.76 mm471 mm24Fine detail: vinyl and paper only, weed with care
1.68 × 4 in (43 × 102 mm)1 mm628 mm12Vinyl, card and thin sheet
2.51 × 6 in (64 × 152 mm)1.5 mm942 mm4Vinyl, card and thin sheet
3.35 × 8 in (85 × 203 mm)2 mm1,256 mm3Vinyl, card and thin sheet
5.03 × 12 in (128 × 305 mm)3 mm1,884 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mermaid SVG files

← Mermaid fin above the water All 12 mermaids Mermaid tail monogram frame →