Free mason jar SVG

Split mason jar for a name SVG

Split mason jar for a name, as a solid black shape
Split mason jar for a name. The preview is the SVG file itself.

A lidded jar cut across the middle with a clear band between the halves for a name. It comes as two pieces: the lid and shoulders above, the base below.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.6 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut11: 2 outer edges and 9 cut-outs
Cut length572 mm at this size
Narrowest part3.2 mm at this size
Nodes76 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.81 mm145 mm140Fine detail: vinyl and paper only, weed with care
1.32 × 2 in (34 × 51 mm)1.6 mm291 mm40Vinyl, card and thin sheet
1.98 × 3 in (50 × 76 mm)2.4 mm436 mm15Vinyl, card and thin sheet
2.64 × 4 in (67 × 102 mm)3.3 mm581 mm8Any material, including 3 mm wood and acrylic
3.96 × 6 in (101 × 152 mm)4.9 mm872 mm2Any material, including 3 mm wood and acrylic
5.28 × 8 in (134 × 203 mm)6.5 mm1,162 mm2Any material, including 3 mm wood and acrylic
7.92 × 12 in (201 × 305 mm)9.8 mm1,743 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mason jar SVG files

← String of mason jar lights All 16 mason jars Layered mason jar with flowers →