Marshmallow s’more, side view SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A s’more seen from the side: a cracker with five holes, a marshmallow squashed until it bulges out at both ends, a slab of chocolate scored into squares, and a second cracker. Thin slits between the layers stop short of the ends, so it cuts as one piece.
What is in the file
| Size | 100 × 63 mm (3.94 × 2.46 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 963 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 90 curve and line segments |
| Also found as | Smores SVG |
Measured from the file. PNG: 2,000 × 1,281 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.63 in (25 × 16 mm) | 0.51 mm | 245 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.25 in (51 × 32 mm) | 1 mm | 489 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.88 in (76 × 48 mm) | 1.5 mm | 734 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.5 in (102 × 64 mm) | 2 mm | 978 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.76 in (152 × 95 mm) | 3 mm | 1,468 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 5.01 in (203 × 127 mm) | 4.1 mm | 1,957 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.51 in (305 × 191 mm) | 6.1 mm | 2,935 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More marshmallow SVG files
-
Marshmallow on a stick Solid · one piece -
Crossed marshmallow roasting sticks Solid · one piece -
Marshmallow roasting over a campfire Solid · one piece -
Two marshmallows on a forked twig Solid · one piece -
Pile of six marshmallows Solid · one piece -
Tower of three marshmallows Solid · one piece -
Mug of cocoa with marshmallows Solid · one piece -
Smiling marshmallow with a face Solid · one piece
← Single marshmallow All 14 marshmallows Marshmallow on a stick →