Free Mama Needs Coffee SVG

Mama Needs Coffee stencil plate SVG

Mama Needs Coffee stencil plate, as a solid black shape — Mama Needs Coffee stencil plate. The preview is the SVG file itself.

A rounded plate with “MAMA NEEDS COFFEE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	16: 1 outer edge and 15 cut-outs
Cut length	1,294 mm at this size
Narrowest part	1.4 mm at this size
Nodes	326 curve and line segments

Measured from the file. PNG: 2,000 × 1,215 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.36 mm	329 mm	150	Too fine for most machines
2 × 1.18 in (51 × 30 mm)	0.71 mm	657 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.78 in (76 × 45 mm)	1.1 mm	986 mm	18	Vinyl, card and thin sheet
4 × 2.37 in (102 × 60 mm)	1.4 mm	1,315 mm	8	Vinyl, card and thin sheet
6 × 3.55 in (152 × 90 mm)	2.1 mm	1,972 mm	3	Vinyl, card and thin sheet
8 × 4.74 in (203 × 120 mm)	2.8 mm	2,629 mm	2	Vinyl, card and thin sheet
12 × 7.1 in (305 × 180 mm)	4.3 mm	3,944 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Needs Coffee SVG files

← Mama Needs Coffee outline lettering All 12 Mama Needs Coffee designs Mama Needs Coffee with a drop shadow →