Free Mama Needs Coffee SVG

Mama Needs Coffee in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mama Needs Coffee in Lobster, as a solid black shape
Mama Needs Coffee in Lobster. The preview is the SVG file itself.

“Mama Needs Coffee” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 48 mm (3.94 × 1.87 in), scales to any size
Pieces5 separate pieces
Outlines to cut18: 5 outer edges and 13 cut-outs
Cut length869 mm at this size
Narrowest part0.8 mm at this size
Nodes435 curve and line segments

Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.2 mm221 mm180Too fine for most machines
2 × 0.95 in (51 × 24 mm)0.41 mm441 mm50Too fine for most machines
3 × 1.42 in (76 × 36 mm)0.61 mm662 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.9 in (102 × 48 mm)0.81 mm883 mm10Fine detail: vinyl and paper only, weed with care
6 × 2.85 in (152 × 72 mm)1.2 mm1,324 mm4Vinyl, card and thin sheet
8 × 3.8 in (203 × 97 mm)1.6 mm1,766 mm3Vinyl, card and thin sheet
12 × 5.7 in (305 × 145 mm)2.4 mm2,649 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mama Needs Coffee SVG files

← Mama Needs Coffee in Pacifico All 13 Mama Needs Coffee designs Mama Needs Coffee in Kaushan Script →