Free Losing My Mind One Kid at a Time SVG

Losing My Mind stencil plate SVG

Losing My Mind stencil plate, as a solid black shape
Losing My Mind stencil plate. The preview is the SVG file itself.

A rounded plate with “LOSING MY MIND ONE KID AT A TIME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 74 mm (3.94 × 2.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut26: 1 outer edge and 25 cut-outs
Cut length1,575 mm at this size
Narrowest part1 mm at this size
Nodes427 curve and line segments

Measured from the file. PNG: 2,000 × 1,506 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)0.25 mm400 mm120Too fine for most machines
2 × 1.49 in (51 × 38 mm)0.51 mm800 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.23 in (76 × 57 mm)0.76 mm1,200 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.97 in (102 × 75 mm)1 mm1,600 mm6Vinyl, card and thin sheet
6 × 4.46 in (152 × 113 mm)1.5 mm2,400 mm2Vinyl, card and thin sheet
8 × 5.94 in (203 × 151 mm)2 mm3,200 mm1Vinyl, card and thin sheet
12 × 8.92 in (305 × 226 mm)3 mm4,801 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Losing My Mind One Kid at a Time SVG files

← Losing My Mind outline lettering All 10 Losing My Mind One Kid at a Time designs Losing My Mind with a drop shadow →