Free Losing My Mind One Kid at a Time SVG

Losing My Mind in Amatic SC SVG

Losing My Mind in Amatic SC, as a solid black shape
Losing My Mind in Amatic SC. The preview is the SVG file itself.

“Losing My Mind One Kid at a Time” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 71 mm (3.94 × 2.81 in), scales to any size
Pieces25 separate pieces
Outlines to cut31: 25 outer edges and 6 cut-outs
Cut length1,617 mm at this size
Narrowest part1 mm at this size
Nodes775 curve and line segments

Measured from the file. PNG: 2,000 × 1,450 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.25 mm411 mm130Too fine for most machines
2 × 1.43 in (51 × 36 mm)0.51 mm821 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.14 in (76 × 54 mm)0.76 mm1,232 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.86 in (102 × 73 mm)1 mm1,643 mm6Vinyl, card and thin sheet
6 × 4.28 in (152 × 109 mm)1.5 mm2,464 mm2Vinyl, card and thin sheet
8 × 5.71 in (203 × 145 mm)2 mm3,286 mm2Vinyl, card and thin sheet
12 × 8.57 in (305 × 218 mm)3 mm4,929 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Losing My Mind One Kid at a Time SVG files

← Losing My Mind in Lilita One All 10 Losing My Mind One Kid at a Time designs Losing My Mind in block capitals →