Lip balm holder tag with two straps SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tag with a round top and a ribbon hole. Two pairs of slits make two straps; lift them and slide the tube under both. Cut 112 mm tall, the tag is 56 mm wide and each slit is 27 mm long, which lets a strap arch over a 16 mm tube.
What is in the file
| Size | 50 × 100 mm (1.97 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 491 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 33 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,038 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.5 × 1 in (13 × 25 mm) | Over 1.5 mm | 125 mm | 170 | Vinyl, card and thin sheet |
| 1 × 2 in (25 × 51 mm) | Over 3 mm | 249 mm | 50 | Any material, including 3 mm wood and acrylic |
| 1.5 × 3 in (38 × 76 mm) | Over 4.6 mm | 374 mm | 21 | Any material, including 3 mm wood and acrylic |
| 2 × 4 in (51 × 102 mm) | Over 6.1 mm | 499 mm | 10 | Any material, including 3 mm wood and acrylic |
| 3 × 6 in (76 × 152 mm) | Over 9.1 mm | 748 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4 × 8 in (102 × 203 mm) | Over 12 mm | 998 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6 × 12 in (152 × 305 mm) | Over 18 mm | 1,497 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lip balm holder SVG files
-
Heart lip balm holder Solid · one piece -
Flower lip balm holder Solid · one piece -
Apple lip balm holder for a teacher Solid · one piece -
Present lip balm holder with a bow Solid · one piece -
Lip balm holder card with a pocket Solid · one piece -
Lip balm holder box with a window Solid · one piece -
Lip balm holder stand for three tubes Solid · one piece -
Lip balm holder template to print and cut by hand Outline · 6 pieces
← Scalloped lip balm holder in two colours All 10 lip balm holders Heart lip balm holder →