Free lightning bolt SVG

Lightning bolt with a drop shadow SVG

Lightning bolt with a drop shadow, in layered colours
Lightning bolt with a drop shadow. The preview is the SVG file itself.

A yellow bolt over a dark copy of itself shifted down and to the right, for a comic-book look. Two layers: cut the shadow first and stick the bolt on top.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size50 × 100 mm (1.98 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length601 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes22 curve and line segments
Layers2: shadow and bolt

Measured from the file. PNG: 1,044 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)Over 1.5 mm153 mm170Vinyl, card and thin sheet
1.01 × 2 in (26 × 51 mm)Over 3 mm305 mm50Any material, including 3 mm wood and acrylic
1.51 × 3 in (38 × 76 mm)Over 4.6 mm458 mm21Any material, including 3 mm wood and acrylic
2.01 × 4 in (51 × 102 mm)Over 6.1 mm611 mm10Any material, including 3 mm wood and acrylic
3.02 × 6 in (77 × 152 mm)Over 9.1 mm916 mm3Any material, including 3 mm wood and acrylic
4.02 × 8 in (102 × 203 mm)Over 12 mm1,221 mm2Any material, including 3 mm wood and acrylic
6.04 × 12 in (153 × 305 mm)Over 18 mm1,832 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lightning bolt SVG files

← High voltage warning triangle All 18 lightning bolts Lightning bolt with a border →