Layered lifeguard in six colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Six layers to stack: a dark backing a little larger than the figure, the skin, a white vest, red shorts and rescue can, brown hair, and a yellow visor and whistle.
What is in the file
| Size | 61 × 100 mm (2.4 × 3.94 in), scales to any size |
|---|---|
| Pieces | 15 separate pieces |
| Outlines to cut | 16: 15 outer edges and 1 cut-out |
| Cut length | 1,374 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 201 curve and line segments |
| Layers | 6: backing, skin, vest, shorts and can, hair and visor and whistle |
Measured from the file. PNG: 1,250 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.61 × 1 in (15 × 25 mm) | Over 1.5 mm | 349 mm | 150 | Vinyl, card and thin sheet |
| 1.22 × 2 in (31 × 51 mm) | Over 3 mm | 698 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.83 × 3 in (46 × 76 mm) | Over 4.6 mm | 1,047 mm | 18 | Any material, including 3 mm wood and acrylic |
| 2.44 × 4 in (62 × 102 mm) | Over 6.1 mm | 1,396 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.66 × 6 in (93 × 152 mm) | Over 9.1 mm | 2,094 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.88 × 8 in (124 × 203 mm) | Over 12 mm | 2,792 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.32 × 12 in (186 × 305 mm) | Over 18 mm | 4,188 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lifeguard SVG files
-
Lifeguard with a rescue can Solid · one piece -
Lifeguard silhouette on the stand Solid · one piece -
Lifeguard on the stand under an umbrella Solid · one piece -
Lifeguard tower on the beach Solid · one piece -
Lifeguard whistle on a cord Solid · one piece -
Lifeguard ring buoy with a grab line Solid · one piece -
Lifeguard rescue can Solid · one piece -
Lifeguard beach flag Solid · one piece
← Lifeguard outline All 14 lifeguards Lifeguard with a rescue can →