Lifeguard on the stand under an umbrella SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The lifeguard seated high on the stand, seen from the front: splayed legs with three rungs, a slatted seat back, two arm rests and a scalloped umbrella on a pole at one side.
What is in the file
| Size | 60 × 100 mm (2.37 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 717 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 155 curve and line segments |
Measured from the file. PNG: 1,237 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.6 × 1 in (15 × 25 mm) | 0.28 mm | 182 mm | 150 | Too fine for most machines |
| 1.21 × 2 in (31 × 51 mm) | 0.56 mm | 364 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 1.81 × 3 in (46 × 76 mm) | 0.84 mm | 546 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 2.41 × 4 in (61 × 102 mm) | 1.1 mm | 728 mm | 8 | Vinyl, card and thin sheet |
| 3.62 × 6 in (92 × 152 mm) | 1.7 mm | 1,093 mm | 3 | Vinyl, card and thin sheet |
| 4.82 × 8 in (123 × 203 mm) | 2.2 mm | 1,457 mm | 2 | Vinyl, card and thin sheet |
| 7.24 × 12 in (184 × 305 mm) | 3.4 mm | 2,185 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More lifeguard SVG files
-
Lifeguard tower on the beach Solid · one piece
-
Lifeguard whistle on a cord Solid · one piece
-
Lifeguard ring buoy with a grab line Solid · one piece
-
Lifeguard rescue can Solid · one piece
-
Lifeguard beach flag Solid · one piece
-
Lifeguard badge with crossed oars and a ring buoy Solid · one piece
-
Lifeguard heart with a ring buoy Solid · one piece
-
Lifeguard in a visor and sunglasses Solid · one piece
← Lifeguard silhouette on the stand All 14 lifeguards Lifeguard tower on the beach →