Free Libra SVG

Libra glyph SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Libra glyph. The preview is the SVG file itself.

The sign for Libra on its own, drawn bold with one round pen: a level line with a second line above it that rises into a dome. Two loose pieces, so lift them together on transfer tape.

What is in the file

Size	100 × 82 mm (3.94 × 3.22 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	603 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	43 curve and line segments

Measured from the file. PNG: 2,000 × 1,648 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	Over 1.5 mm	153 mm	120	Vinyl, card and thin sheet
2 × 1.63 in (51 × 42 mm)	Over 3 mm	306 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.45 in (76 × 62 mm)	Over 4.6 mm	459 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.27 in (102 × 83 mm)	Over 6.1 mm	613 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.9 in (152 × 125 mm)	Over 9.1 mm	919 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.54 in (203 × 166 mm)	Over 12 mm	1,225 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.8 in (305 × 249 mm)	Over 18 mm	1,838 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Libra SVG files

← Layered Libra scales in three colours All 13 Libra designs Libra glyph in a ring →