Free letter S SVG

Letter S stencil plate SVG

Letter S stencil plate, as a solid black shape — Letter S stencil plate. The preview is the SVG file itself.

A rounded plate with a block S cut through it, ready to use as a paint or spray stencil. The S is 62 × 76 mm, and the plate leaves 12 mm of margin round it to mask overspray.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	86 × 100 mm (3.39 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	717 mm at this size
Narrowest part	4.1 mm at this size
Nodes	48 curve and line segments

Measured from the file. PNG: 1,731 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.86 × 1 in (22 × 25 mm)	1 mm	182 mm	110	Vinyl, card and thin sheet
1.72 × 2 in (44 × 51 mm)	2.1 mm	364 mm	30	Vinyl, card and thin sheet
2.58 × 3 in (66 × 76 mm)	3.1 mm	546 mm	12	Any material, including 3 mm wood and acrylic
3.44 × 4 in (87 × 102 mm)	4.2 mm	728 mm	6	Any material, including 3 mm wood and acrylic
5.16 × 6 in (131 × 152 mm)	6.2 mm	1,093 mm	2	Any material, including 3 mm wood and acrylic
6.88 × 8 in (175 × 203 mm)	8.3 mm	1,457 mm	1	Any material, including 3 mm wood and acrylic
10.32 × 12 in (262 × 305 mm)	12 mm	2,185 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter S SVG files

← Letter S cut from a heart All 18 letter S designs Letter S outline →