Free letter S SVG

Polka dot letter S SVG

Polka dot letter S, as a solid black shape — Polka dot letter S. The preview is the SVG file itself.

A chunky S with round holes punched through it in a staggered grid. Every dot sits fully inside the letter, so the edge stays clean and the letter stays in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	65 × 100 mm (2.57 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	37: 1 outer edge and 36 cut-outs
Cut length	934 mm at this size
Narrowest part	4.3 mm at this size
Nodes	189 curve and line segments

Measured from the file. PNG: 1,335 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.65 × 1 in (17 × 25 mm)	1.1 mm	237 mm	140	Vinyl, card and thin sheet
1.31 × 2 in (33 × 51 mm)	2.2 mm	474 mm	40	Vinyl, card and thin sheet
1.96 × 3 in (50 × 76 mm)	3.3 mm	712 mm	15	Any material, including 3 mm wood and acrylic
2.62 × 4 in (66 × 102 mm)	4.4 mm	949 mm	8	Any material, including 3 mm wood and acrylic
3.92 × 6 in (100 × 152 mm)	6.6 mm	1,423 mm	2	Any material, including 3 mm wood and acrylic
5.23 × 8 in (133 × 203 mm)	8.7 mm	1,898 mm	2	Any material, including 3 mm wood and acrylic
7.85 × 12 in (199 × 305 mm)	13 mm	2,847 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter S SVG files

← Letter S outline All 18 letter S designs Letter S in a laurel wreath →