Free letter F SVG

Letter F in UnifrakturMaguntia SVG

Letter F in UnifrakturMaguntia, as a solid black shape
Letter F in UnifrakturMaguntia. The preview is the SVG file itself.

The capital F of UnifrakturMaguntia, a blackletter, in 2 separate strokes, as the typeface draws it, 100 mm tall. This F has no closed counter, so it also works as a stencil as it is. The hairlines are thickened a little so that they survive cutting.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size83 × 100 mm (3.25 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length676 mm at this size
Narrowest part3.5 mm at this size
Nodes117 curve and line segments

Measured from the file. PNG: 1,663 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.89 mm172 mm110Fine detail: vinyl and paper only, weed with care
1.65 × 2 in (42 × 51 mm)1.8 mm343 mm30Vinyl, card and thin sheet
2.48 × 3 in (63 × 76 mm)2.7 mm515 mm12Vinyl, card and thin sheet
3.3 × 4 in (84 × 102 mm)3.6 mm687 mm6Any material, including 3 mm wood and acrylic
4.95 × 6 in (126 × 152 mm)5.3 mm1,030 mm2Any material, including 3 mm wood and acrylic
6.6 × 8 in (168 × 203 mm)7.1 mm1,374 mm1Any material, including 3 mm wood and acrylic
9.9 × 12 in (251 × 305 mm)11 mm2,060 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter F SVG files

← Letter F in Rye All 18 letter F designs Letter F in Lilita One →