Free letter F SVG

Letter F outline SVG

Letter F outline, drawn as a line — Letter F outline. The preview is the SVG file itself.

The block F as an outline 2.4 mm wide, hollow inside. For colouring, for foil and pen work, or to layer over the solid letter in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	77 × 100 mm (3.05 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	893 mm at this size
Narrowest part	2 mm at this size
Nodes	54 curve and line segments

Measured from the file. PNG: 1,565 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.77 × 1 in (20 × 25 mm)	0.51 mm	227 mm	120	Fine detail: vinyl and paper only, weed with care
1.55 × 2 in (39 × 51 mm)	1 mm	454 mm	30	Vinyl, card and thin sheet
2.32 × 3 in (59 × 76 mm)	1.5 mm	680 mm	12	Vinyl, card and thin sheet
3.1 × 4 in (79 × 102 mm)	2 mm	907 mm	6	Vinyl, card and thin sheet
4.64 × 6 in (118 × 152 mm)	3 mm	1,361 mm	2	Any material, including 3 mm wood and acrylic
6.19 × 8 in (157 × 203 mm)	4.1 mm	1,815 mm	1	Any material, including 3 mm wood and acrylic
9.29 × 12 in (236 × 305 mm)	6.1 mm	2,722 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter F SVG files

← Letter F stencil plate All 18 letter F designs Polka dot letter F →