Free letter E SVG

Split letter E for a name SVG

Split letter E for a name, as a solid black shape — Split letter E for a name. The preview is the SVG file itself.

A serif E cut in two across the middle, with a ruled gap 16 mm tall for a name or a date in your own lettering. Two pieces, each closed off by its rule: the top half and the bottom half.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.84 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	866 mm at this size
Narrowest part	2.2 mm at this size
Nodes	57 curve and line segments

Measured from the file. PNG: 1,954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.56 mm	220 mm	100	Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (50 × 51 mm)	1.1 mm	440 mm	25	Vinyl, card and thin sheet
2.93 × 3 in (74 × 76 mm)	1.7 mm	660 mm	9	Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)	2.2 mm	880 mm	4	Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)	3.4 mm	1,320 mm	2	Any material, including 3 mm wood and acrylic
7.81 × 8 in (198 × 203 mm)	4.5 mm	1,760 mm	1	Any material, including 3 mm wood and acrylic
11.71 × 12 in (297 × 305 mm)	6.7 mm	2,640 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter E SVG files

← Letter E cut from a disc All 18 letter E designs Letter E cut from a heart →