Free letter E SVG

Letter E cut from a disc SVG

Letter E cut from a disc, as a solid black shape — Letter E cut from a disc. The preview is the SVG file itself.

A solid disc with a block E cut out of it. One piece: cut it in vinyl for a round decal, or in wood for a coaster or an ornament. The E is 53.8 × 62 mm inside the 100 mm disc. A block E has no enclosed part, so the disc needs no bridge.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	670 mm at this size
Narrowest part	2.7 mm at this size
Nodes	30 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.69 mm	170 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.4 mm	340 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.1 mm	511 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.7 mm	681 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	4.1 mm	1,021 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	5.5 mm	1,361 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	8.2 mm	2,042 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter E SVG files

← Letter E in a ring monogram All 18 letter E designs Split letter E for a name →