Free Let’s Stay Home SVG

Let’s Stay Home in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let’s Stay Home in Pacifico, as a solid black shape
Let’s Stay Home in Pacifico. The preview is the SVG file itself.

“Let’s Stay Home” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 61 mm (3.94 × 2.42 in), scales to any size
Pieces7 separate pieces
Outlines to cut15: 7 outer edges and 8 cut-outs
Cut length844 mm at this size
Narrowest part1.3 mm at this size
Nodes333 curve and line segments

Measured from the file. PNG: 2,000 × 1,258 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 16 mm)0.33 mm214 mm140Too fine for most machines
2 × 1.23 in (51 × 31 mm)0.66 mm429 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.84 in (76 × 47 mm)0.99 mm643 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.46 in (102 × 62 mm)1.3 mm858 mm8Vinyl, card and thin sheet
6 × 3.68 in (152 × 94 mm)2 mm1,286 mm3Vinyl, card and thin sheet
8 × 4.91 in (203 × 125 mm)2.6 mm1,715 mm2Vinyl, card and thin sheet
12 × 7.37 in (305 × 187 mm)4 mm2,573 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Stay Home SVG files

← Let’s Stay Home with a little house All 13 Let’s Stay Home designs Let’s Stay Home in Lobster →